Go to Vergokan homepage

Cable ladder - KLL110

Side walls: perforated S-profile
Perforated C rungs 15x30
Usable inner height: 94 mm
Rung distance: 250 mm (to order : 100 mm - 300 mm, increments of 50 mm)
To order: width 700 - 1200 mm (increments of 100 mm)


ETIM: EC000854


HDHDHDHDHDHDHD
HD Reference
mm

mm

mm

mm
kg
m
Stock Unit
KLL110.200 110 200   3000 3.699 18 M
KLL110.300 110 300   3000 3.937 18 M
KLL110.400 110 400   3000 4.174 18 M
KLL110.500 110 500   3000 4.412 18 M
KLL110.600 110 600   3000 4.650 18 M
KLL110.800 110 800   3000 5.125 18 M
KLL110.1000 110 1000   3000 5.600 18 M

Standard finish

  • Standard finish Pre-galvanised

Optional finish

  • Optional finish Hot-dip galvanised
  • Optional finish Coating
  • Optional finish length 6000 mm
CHARACTERISTICS
- lightweight
- strong
- partition (SLOS85) can be fixed to the cable ladder with a sliding nut (GM6) and pan head bolt (RB6.10)
- no further coupling holes are required if the cable ladder is cut.
- rungs are perforated to enable efficient attachment of cables.

TECHNICAL INFORMATION
Side walls are constructed from S profile with a return flange and are continuously perforated.
C-profile rungs are fixed at 250 mm intervals.
Rungs are mechanically attached to the side wall of the cable ladder.
Rungs are alternately placed with openings upwards and downwards.

Technical info

Load diagram

KLL110 LOAD DIAGRAM
This diagram illustrates the permissible uniformly distributed horizontal loads applied to multiple supports. They comply with IEC 61537 with connection in the centre of the span and the end span = 0,8x the span.

F = max. admissible load (daN/m)
L = support distance (m)
Max. deflection (m) = L/100