Go to Vergokan homepage

Cable ladder height 100 - KLM100

Cable ladder for large support distances up to 8 metres
Perforated C datarungs 41x21
Usable inner height: 77 mm
Rung distance: 300 mm
To order: Length 3000 mm
To order: Width 700 - 1200 mm (increments of 100 mm)


ETIM: EC000854


Reference Finish
mm

mm

mm

mm
kg
m
Unit
KLM100.150 SZ 100 168 1.5 6000 5.135 60 M
KLM100.200 SZ 100 218 1.5 6000 5.263 60 M
KLM100.300 SZ 100 318 1.5 6000 5.519 60 M
KLM100.400 SZ 100 418 1.5 6000 5.775 60 M
KLM100.450 SZ 100 468 1.5 6000 5.903 60 M
KLM100.500 SZ 100 518 1.5 6000 6.031 60 M
KLM100.600 SZ 100 618 1.5 6000 6.287 60 M
KLM100.750 SZ 100 768 1.5 6000 6.671 60 M
KLM100.800 SZ 100 818 1.5 6000 6.799 60 M
KLM100.900 SZ 100 918 1.5 6000 7.055 60 M
KLM100.1000 SZ 100 1018 1.5 6000 7.311 60 M
ZMKLM100.150 DF 100 168 1.5 6000 5.135 60 M
ZMKLM100.200 DF 100 218 1.5 6000 5.263 60 M
ZMKLM100.300 DF 100 318 1.5 6000 5.519 60 M
ZMKLM100.400 DF 100 418 1.5 6000 5.775 60 M
ZMKLM100.450 DF 100 468 1.5 6000 5.903 60 M
ZMKLM100.500 DF 100 518 1.5 6000 6.031 60 M
ZMKLM100.600 DF 100 618 1.5 6000 6.287 60 M
ZMKLM100.750 DF 100 768 1.5 6000 6.671 60 M
ZMKLM100.800 DF 100 818 1.5 6000 6.799 60 M
ZMKLM100.900 DF 100 918 1.5 6000 7.055 60 M
ZMKLM100.1000 DF 100 1018 1.5 6000 7.311 60 M
CHARACTERISTICS
- strong
- useable inner height 77 mm, ideal for large diameter cables
- no further coupling holes are required if the cable ladder is cut
- no joiners are required to attach accessories such as bends, tees etc.
- rungs are perforated to enable efficient attachment of cables and easy use of cable clamps.
- partition (SLOS60) can be fixed to the cable ladder with a sliding nut (PNP06) and pan head bolt (RB6.20).
TECHNICAL INFORMATION
- Side walls are constructed from S profile with a return flange and are continuously perforated
- Perforated C datarungs are fixed at 300 mm intervals.
- rungs are mechanically attached to the side wall of the cable ladder.
- rungs are alternately placed with openings upwards and downwards

Technical info

Product datasheet

Questions?

For more info, please contact

vergokanexport@atkore.com
+32 55 31 83 35

Load diagram

KLM100 LOAD DIAGRAM
This diagram illustrates the permissible uniformly distributed horizontal loads applied to multiple supports. They comply with IEC 61537 with connection in the centre of the span and the end span = 0,8x the span.

F = max. admissible load (daN/m)
L = support distance (m)
Max. deflection (m) = L/200