Go to Vergokan homepage

Cable ladder height 125 - KLM125

Cable ladder for large support distances up to 8 metres
Perforated C datarungs 41x21
Usable inner height: 102 mm
Rung distance: 300 mm
To order: Length 3000 mm
To order: Width 700 - 1200 mm (increments of 100 mm)


ETIM: EC000854


Reference Finish
mm
mm
mm
mm 		kg
m 		Stock Unit
KLM125.150 SZ 125 168 1.5 6000 5.723 48 M
KLM125.200 SZ 125 218 1.5 6000 5.851 48 M
KLM125.300 SZ 125 318 1.5 6000 6.111 48 M
KLM125.400 SZ 125 418 1.5 6000 6.363 48 M
KLM125.450 SZ 125 468 1.5 6000 6.491 48 M
KLM125.500 SZ 125 518 1.5 6000 6.619 48 M
KLM125.600 SZ 125 618 1.5 6000 6.875 48 M
KLM125.750 SZ 125 768 1.5 6000 7.259 48 M
KLM125.800 SZ 125 818 1.5 3000 7.387 48 M
KLM125.900 SZ 125 918 1.5 3000 7.644 48 M
KLM125.1000 SZ 125 1018 1.5 3000 7.900 48 M
ZMKLM125.150 DF 125 168 1.5 3000 5.723 48 M
ZMKLM125.200 DF 125 218 1.5 6000 5.851 48 M
ZMKLM125.300 DF 125 318 1.5 6000 6.111 48 M
ZMKLM125.400 DF 125 418 1.5 6000 6.363 48 M
ZMKLM125.450 DF 125 468 1.5 6000 6.491 48 M
ZMKLM125.500 DF 125 518 1.5 6000 6.619 48 M
ZMKLM125.600 DF 125 618 1.5 6000 6.875 48 M
ZMKLM125.750 DF 125 768 1.5 6000 7.259 48 M
ZMKLM125.800 DF 125 818 1.5 6000 7.387 48 M
ZMKLM125.900 DF 125 918 1.5 6000 7.644 48 M
ZMKLM125.1000 DF 125 1018 1.5 6000 7.900 48 M

Standard finish

  • Standard finish Pre-galvanised

Optional finish

  • Optional finish
  • Optional finish Length 3000 mm
CHARACTERISTICS
- strong
- useable inner height 102 mm, ideal for large diameter cables
- no further coupling holes are required if the cable ladder is cut
- no joiners are required to attach accessories such as bends, tees etc.
- rungs are perforated to enable efficient attachment of cables and easy use of cable clamps.
- partition (SLOS85) can be fixed to the cable ladder with a sliding nut (PNP06) and pan head bolt (RB6.20).
TECHNICAL INFORMATION
- Side walls are constructed from S profile with a return flange and are continuously perforated
- Perforated C datarungs are fixed at 300 mm intervals.
- rungs are mechanically attached to the side wall of the cable ladder.
- rungs are alternately placed with openings upwards and downwards

Fix with:

RBK
Round head square neck bolt (DIN 603)
RBK
RM
Flange nut (DIN 6923)
RM
KLM125KP_v1
Joiner for KLM125
KLM125KP

Technical info

Product datasheet

Questions?

For more info, please contact

vergokanexport@atkore.com
+32 55 31 83 35

Load diagram

KLM LOAD DIAGRAM
This diagram illustrates the permissible uniformly distributed horizontal loads applied to multiple supports. They comply with IEC 61537 with connection in the centre of the span and the end span = 0,8x the span.

F = max. admissible load (daN/m)
L = support distance (m)
Max. deflection (m) = L/200

You may also be interested in ...

KLMB

Horizontal bend for KLM

KLMB
KLMZWBK

Bracket clamp

KLMZWBK
KLMZWAB

Stand-off bracket for KLM/KLZ/KLW

KLMZWAB
DOPKLM

End cap for KLM

DOPKLM
KLM100VB45_v1

External riser 45° for KLM100

KLM100VB45
KLM100DOP

End cap for KLM100

DOPKLM100
KLM100SB45_v1

Internal riser 45° for KLM100

KLM100SB45
KLM100B_v1

Horizontal bend for KLM100

KLM100B
KLM100B45_v1

Horizontal bend 45° for KLM100

KLM100B45
KLMZWBK

Bracket clamp

KLMZWBK
KLMZWAB

Stand-off bracket for KLM/KLZ/KLW

KLMZWAB
KLM125B_v1

Horizontal bend for KLM125

KLM125B
DOPKLM

End cap for KLM

DOPKLM
KLM125B45_v1

Horizontal bend for KLM125

KLM125B45
DOPKLM

End cap for KLM125

DOPKLM125
KLMZWAB

Stand-off bracket for KLM/KLZ/KLW

KLMZWAB
KLMZWBK

Bracket clamp

KLMZWBK
KLMZWAB

Stand-off bracket for KLM/KLZ/KLW

KLMZWAB
KLMZWBK

Bracket clamp

KLMZWBK
KLM100B45_v1

Horizontal bend 45° for I6KLM100

I6KLM100B45
KLM100SB45_v1

Internal riser 45° for I6KLM100

I6KLM100SB45
KLM100VB45_v1

External riser 45° for I6KLM100

I6KLM100VB45
KLM125B45_v1

Horizontal bend for I6KLM125

I6KLM125B45